3-8
3.7 Program Upgrade
You can upgrade the pulse oximeter software by downloading the upgrade software through a
serial port. The upgrade software can run directly on a personal computer. You can upgrade
the following programs by connecting the pulse oximeter with the personal computer through
a PC communication cable:
Bootstrap program
System program
Multilingual library
BMP resource files (including screen icons, startup screen and standby screen)
General configurations (including password and company name)
System function configurations
SpO
2
module program
For details, refer to help and instructions for program upgrade.
Caution
z Disconnect the pulse oximeter from the patient and make sure the important data
are saved before upgrade.
z Do not shut down or power off the equipment when upgrading the bootstrap
program. It may cause the equipment to break down.
z Program upgrade should be performed by qualified service personnel only.
NOTE
z After upgrading the bootstrap program, re-upgrade the system program and other
programs to ensure compatibility.
z Make sure the version of the upgrade package is what you desire. If you want to
obtain the latest upgrade package, contact our Customer Service Department.
To Next Page
Loading...
Need help?
General
