4-2
4.3 Software Version Check
Some troubleshooting tasks may require you to identify the configuration and software
version of your pulse oximeter for software compatibility. For detailed information on
version compatibility, contact our Customer Service Department.
To check the version information,
1. Select [Menu]→[System]→[Maintenance >>]→enter required password→[Version
>>]. In the [Version] menu, you can view PCBA version and copyright information.
2. Select [Menu]→[System]→[Maintenance >>]→enter required password→[Version
>>]→[Software version >>]. In the [Software version] menu, you can view system
software version and module version.
4.4 Technical Alarm Check
Before troubleshooting the pulse oximeter, check for technical alarm message. If an alarm
message is presented, eliminate the technical alarm first. For detailed information on
technical alarm message, possible cause and corrective action, refer to the pulse oximeter’s
Operation Manual.
To Next Page
Loading...
Need help?
General
