Mindray Zeus8 User Manual

Part III Appendix
Description of Self-Test Items 244
 Troubleshooting suggestion
a If the test result is Error, restart the equipment and re-perform the self-test. If the problem
persists, recover the equipment.
b If the test result is FAIL, replace the main board.
2.14 Z0212 FPGA Temperature Test
 Upper-level test item
Communication Test Between PC Module and MF FPGA
 Test content
The PC reads the FPGA core temperature through the PCIe bus.
 Test failure analysis
If the test result is Error, the drive malfunctions.
If the test result is FAIL, the FPGA core temperature is too high.
 Troubleshooting suggestion
a If the test result is Error, restart the equipment and re-perform the self-test. If the problem
persists, recover the equipment.
b If the test result is FAIL, check whether the fans are blocked, whether the FPGA radiator is
properly assembled, and whether the heat-conducting cream and radiator are in good contact.
2.15 Z0301 Fan Speed Test
 Upper-level test item
Communication Monitoring Test
 Test content
Read the fan speed through the UART of the SM ARM and judge whether the current fan speed
meets the requirements.
 Test failure analysis
If the test result is Error, the drive malfunctions.
If the test result is FAIL, the fans are blocked (do not rotate), or a fault is detected on the main
board.
 Troubleshooting suggestion
a If the test result is Error, restart the equipment and re-perform the self-test. If the problem
persists, recover the equipment.
b If the test result is FAIL, check whether the fans rotate properly. If so, replace the main board.
2.16 Z0302 Fan Speed Adjustment Test
 Upper-level test item
Communication Monitoring Test
 Test content

Mindray Zeus8 Specifications

General

Brand	Mindray
Model	Zeus8
Category	Diagnostic Equipment
Language	English