Command Mode - Configuration & Operation
26
Configuration Menu/Dialer Configuration/Report Options/2. Trouble priority
Use this function to set the account priority for reporting troubles. If the priority is set for account#1 then the dialer
will try account#1 first for reporting.
Configuration Menu/Dialer Configuration/Report Options/3. Supervisory priority
Use this function to set the account priority for reporting supervisory. If the priority is set for account#1 then the
dialer will try account#1 first for reporting.
Configuration Menu/Dialer Configuration/Report Options/4. Auxiliary Disconnect/Supervisory Report
Auxiliary disconnect cancels alarm & supervisory reporting through dialer
If this function is enabled, the auxiliary disconnect will block the alarm and supervisory events from being reported
through the dialer.
Configuration Menu/Dialer Configuration/Report Options/5. Dialer Operation Mode
Use this function to select the functionality of the dialer. In DACT mode only common trouble/alarm/supervisory are
reported while in UDACT mode all point information is reported
Configuration Menu/Dialer Configuration/4. Time Parameters
Configuration Menu/Dialer Configuration/Time Parameters/1. AC Loss delay
Use this function to delay the reporting of AC loss trouble on the dialer for the programmed time period. (Note: the
PR-300 delay is configured separately. See Features Item 10 - Power Fail Timer.)
Configuration Menu/Dialer Configuration/Time Parameters/2. Cell phone date
Use this function to set the test report date for the cell phone line reporting. If the date is set to 0, this means there
is no test reporting for cell phone or the phone line is a regular line. Other settings could be anywhere from 01-28,
representing which day of the month the test should be performed. When a cell phone service is employed for the
Trouble priority :
[X] Account 1
[ ] Account 2
Supv . priority :
[X] Account 1
[ ] Account 2
AuxDis Alm /Supv Rpt .
[X] Disable
[ ] Enable
Dialer oper mode
[X] (U)DACT
[ ] DACT
Time parameters
1. AC loss delay
2. Cell phone date
3. Auto test time
AC Loss delay (hrs)
0
Cellular report date
0
To Next Page
Loading...
Need help?
General
