FX-350/351 Series Programming Manual
23
If finds different device types from original but still compatible
If finds different device types from original and not compatible
A warning message is displayed if the configuration is changed before continuing
The following message is displayed while the auto programming is in progress.
CONFIGURATION MENU/3. DEFAULT CONFIGURATION
This option will load the default configuration in the system. The user is prompted for confirmation
After the default settings are loaded the following is displayed for confirmation.
CONFIGURATION MENU/4. DIALER CONFIGURATION
The dialer configuration is divided into 6 sub menus
Configuration Menu/Dialer Config/1. Account Info
Configuration Menu/Dialer Config/Account Info/1. Account#1 ID
Set the Account ID for the monitoring station to which the dialer reports events, the maximum # of digits allowed for
Xx device (s) on lp :x
Chgd .update type ?Y
Xx device (s) on lp :x
chgd . Delete & add?Y
Sys must be rechked
When done !continue ?Y
Auto Programming
In process
Load the default
Settings ?Y/N
Default settings
have been loaded .
--Dialer config --
1. Account Info
2. Telephone line
3. Report Options
4. Time parameter
5. Enable /Disable
6. Ring Detect
--Account Info --
1. Account #1 ID
2. Account #1 Tel
3. Accnt #1 format
4. Account #2 ID
5. Account #2 Tel
6. Accnt #2 format
Account #1 ID
123456
To Next Page
Loading...
Need help?
General
