6. Controller
6. Controller
6-1. PAR-W31MAA specifications
Item Description Operations Display
ON/OFF
Runs and stops the operation of a group of units
Operation mode switching
Switches between Mode 1/Mode 2/Mode 3
* Available operation modes vary depending on the unit to be connected.
* Switching limit setting can be made via a remote controller.
Water temperature setting
Temperature can be set within the ranges below. (in increments of 0.5°C or 1°F)
49°C ~ 80°C (120°F ~ 176°F)
Water temperature display
10°C ~ 80°C (50°F ~ 176°F)
(in increments of 0.5°C or 1°F)
Permit/Prohibit
local operation
Individually prohibits operations of each local remote control function: ON/OFF,
Operation modes, water temperature setting, Circulating water replacement warning
reset.
* Upper level controller may not be connected depending on the unit to be connected.
Weekly scheduler
ON/OFF/Water temperature setting can be done up to 8 times one day in the week.
(in increments of five minutes)
Error
When an error is currently occurring on a unit, the afflicted unit and the error code are
displayed.
Self check (Error history)
Searches the latest error history by selecting "CHECK" from the Main menu.
LANGUAGE setting
The language on the dot matrix LCD can be changed. (11 languages)
English/French/German/Swedish/Spanish/Italian/Danish/Dutch/Finnish
/Norwegian/Portuguese
(Front view) (Side view) (Rear view)
Unit: mm (in.)
120 (4-3/4)
46 (1-13/16)
19
(3/4)
83.5 (3-5/16)
120 (4-3/4)
To Next Page
Loading...
Need help?
General
