Mitsubishi MELSEC-A series Programming Manual

7. APPLICATION INSTRUCTIONS
7 − 9
MELSEC-A
(2) Performs the logical add of the 16-bit data of device specified at (S1) and the
16-bit data of device specified at (S2) per bit, and stores the result into the
device specified at (D1).
(3) As for bit devices, data of them below digit specification is operated as 0.
DOR
(1) Performs the logical add of the 32-bit data of device specified at (D) and the
32-bit data of device specified at (S) per bit, and stores the result into the device
specified at (D).
(2) As for bit devices, data of them below digit specification is operated as 0.
Execution Conditions
16 bits
WOR
Before execution
After execution
32 bits
DOR
Before execution
After execution
OFF
ON
Executed
per scan
Executed
per scan
Executed
only once
Executed
only once
P
Operation command

Mitsubishi MELSEC-A series Specifications

General

Brand	Mitsubishi
Model	MELSEC-A series
Category	Controller
Language	English