Mitsubishi MELSEC-A series Programming Manual

7. APPLICATION INSTRUCTIONS
7 − 77
MELSEC-A
When a constant is designated to (S), writes the same data (value designated to (S))
to the area of n3 points starting from the specified buffer memory.
((S) can be designated in the following range: -32768 to 32767 or 0H to FFFFH.)
n3 words
(The same data
is written)
Remote terminal
buffer memory
0
n2
CPU
(When 5 is
designated to (S))
5
5
5
5
(S)
DTO , PRC
(2) Writes data of "n3×2" points, which begin with the device specified at (S), to the
address starting with the one specified at "n2" of buffer memory in the remote
terminal module specified at "n1".
Remote terminal
buffer memory
Device specified at (S)
CPU module
0
n2
(n3 2)
points
(n3 2)
words
n2+1
When a constant is designated to (S), writes the same data (value designated to (S))
to the area of n3×2 points starting from the specified buffer memory.
((S) can be designated in the following range: -2147483648 to 2147483647 or 0
H to
FFFF
H.)
(n3 2) words
(The same data
is written)
Remote terminal
buffer memory
(When 70000 is
designated to (S))
70000
0
n2
n2+1
70000
70000
70000
CPU
(S)

Mitsubishi MELSEC-A series Specifications

General

Brand	Mitsubishi
Model	MELSEC-A series
Category	Controller
Language	English