Mitsubishi MELSEC-A series Programming Manual

7. APPLICATION INSTRUCTIONS
7 − 134
MELSEC-A
STRAR
(1) Reset instruction for the STRA instruction.
(2) By executing the STRAR instruction, the STRA instruction is enabled again.
(3) Turns off M9043.
Excecution Conditions
ON
Executed only once
Sampling trace command
OFF
ON
Executed only once
Reset command
STRA
STRAR
OFF
Executed only once

Mitsubishi MELSEC-A series Specifications

General

Brand	Mitsubishi
Model	MELSEC-A series
Category	Controller
Language	English