Mitsubishi MT160D Instruction Book

OPERATOR'S SEAT
It is adjustable spring supported seat in 3 stages at incre-
ment of 30 mm (1.18 in.) to suit to the operator's stature.
TOOL BOX
The tool box is located under the operator's seat. To use
the tool box, turn the seat downward to the front.
DRAWBAR
The fixed type drawbar is provided as standard. To tow an
attachment or trailer, be sure to use the drawbar.
3·POINT LINKAGE
This tractor is provided with a 3-point linkage
of category 1 .
The implement which is to be mounted, must match
the 3-point linkage.
NOTE
When an implement is towed with the linkage drawbar
installed on lower links, the lower links should always
be kept horizontal.
HYDRAULIC SYSTEM
Your tractor is provided with the live hydraulic system in
which a hydraulic pump is driven directly by the engine
camshaft and always makes the oil circulate to exert the
hydraulic pressure while the engine is running.
The hydraulic oil of exclusive use is reserved in the trans-
mission case and passed through the oil filter, thus ensuring
effective operation.
Position control, flow control (down speed control) and
lock of the implement are possible with the hydraulic
control lever installed on the right side of the seat.
For external service, the hydraulic pressure can be taken
out by fitting an adapter plate to the delivery pipe installed
on the left side of the seat.
- 17-

Mitsubishi MT160D Specifications

General

Brand	Mitsubishi
Model	MT160D
Category	Tractor
Language	English