－2－
2. SPECIFICATION
(1) Specification of mechanism
Sewing area : X-Direction (left/right) Y-Direction (fore/backward)
: 30 mm 30 mm
Maximum sewing speed : 2500 rpm
Sewing speed : 10 steps variable from 200 to 2500 rpm
Stitch length : 0.1 to 12.7 mm
(Adjustable from 0.1mm to 12.7mm by 0.1mm resolution)
Stitch type : Single needle lock stitch
Needle bar stroke : 41.2 mm
Thread take up lever stroke : 68 mm
Class of needle : DP X 5 # 16 (the standard specification)
Wiper system : Left to right wiping system (the standard specification)
Work holder lift
*2
: 15 mm
Hook : Shuttle hook
Bobbin case : With non racing spring
Bobbin : Aluminum bobbin
Thread trimmer system Horizontal engagement with fixed knife and movable knife
Lubrication system :
Manual oiling and replenishment with the oil braids from the oil
tanks
Lubrication oil : White machining oil
X-Y drive system : Stepping motor and Gear drive
Intermittent or continuous feeding
Machine dimension : 1,200mm(W) x 740mm(L) x 1,220mm(H)
Weight : TOTAL 113Kg
Type of controller : PLK-E-CU-20
Steel stand : T-shape steel stand for the standing or the sitting operation
(2) Specification of main motor
Type of motor : XL-554-20
To Next Page
Loading...
Need help?
General
