1 SAFETY
Mitsubishi Diesel Engine S16R & S16R2 OPERATION & MAINTENANCE MANUAL
61
Pub. No. K29001-00320 Revision: 1
Personal Protective Equipment
Fig. 1-8 Personal Protective Equipment
• Personal protective equipment vary
depending on the working environment
and works (operation, diagnosis,
inspection and maintenance, and so
on).
Specify the rules, and wear the
required personal protective
equipment.
<Personal protective equipment to be worn, in
general>
• Working clothes
• Safety shoes
• Hard hat
• Protective glasses
• Protective mask (gas mask)
<Personal protective equipment to be added
according to the working environment and
works>
• Earplugs (hearing personal protective
equipment)
• Plastic gloves (when handling the
dangerous and toxic chemicals)
• Safety belt (when working at the high
position)
Product-specific Precautions
Use of Chemicals
This engine uses fuel (diesel fuel), engine oil,
coolant (LLC), grease, and anti-corrosive agent.
If these come into contact with your eyes or skin,
they may cause skin burns or abnormal sight (sight
loss at the worst).
To prevent an accident, take measures given
below.
• When handling, wear proper personal protective
equipment.
(protective glasses, protective mask (gas mask),
plastic gloves)
• Wear working clothes with long sleeves and
trousers to protect the skin.
Surface Temperature
A surface of this engine during operation or
immediately after operation is raised to high
temperature (approx. 180°C [356°F]) by location,
and therefore if you touch it, you could get burns.
After making sure with the thermometer (thermo
gun, etc.) that a surface of the engine is cooled
down so that you can touch (approx. 40°C [104°F]),
conduct the inspection and maintenance work.
To Next Page
Loading...
Need help?
General
