2 Insert the connector of the power supply into the port
on the side of the SUC.
3 Plug the AC adapter into a power outlet.
4 Insert the radio into the SUC with the front of the
radio facing the LED of the SUC. Ensure the radio is
securely inserted all the way into the charger.
NOTICE:
For more information, see Charger LED
Indication on page 20 and Operational
Safety Guidelines on page 6.
The red LED on the SUC illuminates to indiciate that
the battery is charging.
4.3
Charging the Radio and the Battery
Using a DLR 12-Pocket Multi-Unit
Charger - Optional Accessory
The DLR 12-Pocket Multi-Unit Charger (MUC) allows drop-
in charging of up to 12 radios or up to six radios and six
stand-alone batteries. The batteries can be charged with
the radios or removed and placed in the MUC separately.
Each of the six charging pockets can hold a radio (with or
without the Holster) or battery, but not both at the same
time.
1 Place the MUC on a flat surface.
2 Insert the power cord plug into the MUC dual pin
connector at the bottom of the MUC.
3 Plug the power cord into an AC outlet.
4 Turn off the radio.
5 Insert the radio or the battery into the charging
pocket with the radio or the battery facing away from
the contacts.
English
18
To Next Page
Loading...
Need help?
General
