2 To select channel, press the Volume Up button or
Volume Down button.
Your hear selected channel voice prompt from your
radio.
3 To exit <Channel Change>, press the PTT button
or wait for the radio Channel/Menu timer to expire.
7.5
Starting Private Reply
The Top button is set to Private Reply feature by default.
This feature allows two people to instantly connect privately
after a group transmission is over.
1 To initiate a Private Reply, press the Top button
during a group call.
The Top button LED blinks orange.
2 After a group call, press PTT button to call privately.
The Top button LED illuminates in solid orange.
3 Wait for the Talk Permit Tone to end and speak.
NOTICE:
There is a channel Hangtime after a Private
transmission. By default, the Hangtime is set
to 10 seconds.
7.6
Talk Range
Table 8: Talk Range
Talk Range
Model
Industrial Multi-Level
Inside steel/
concrete Indus-
trial buildings
Inside multi-lev-
el buildings
ISM 900 MHz
Up to 250,000
sq.ft
Up to 18 Floors
For a group of radio to communicate, the radios need to be
on the same channel and have the same radio PROFILE
ID number. The default PROFILE ID number is 0000.
English
29
To Next Page
Loading...
Need help?
General
