GETTING STARTED
English
38
Hands Free without Accessories (iVOX)
• Enable iVOX by pressing the PTT button
while turning the radio ON and the icon
will blink.
• iVOX operation can be temporarily disabled
by pressing the PTT button.
Note:
• The iVOX feature is available only on display
models RDU2080d, RDV2080d, and
RDU4160d.
• To learn how to set VOX/iVOX sensitivity
levels refer ahead to ‘Menu Options’ in this
section.
• There is a short delay between when you start
talking and when the radio transmits.To learn
how to set VOX/iVOX sensitivity levels, refer
to “MENU Options” on page 39.
Battery Save
Battery Save feature extends battery life as
your radio goes into ‘Idle’ state each time there
is no radio activity. To enable/disable press
SB1 and SB2 buttons simultaneously for 2 or 3
seconds while powering up the radio until you
hear a quick series of beeps. To have a slightly
better attack time, set Battery Save feature to
OFF so that the radio is always ready to
transmit or receive without any delays.
Note: Battery Save feature is set to ON by default
Reset to Factory Defaults
Reset to Factory Defaults will set back all radio
features to the original factory default settings.
To do so press PTT, SB2 and SB1
simultaneously while turning ON the radio until
you hear a high tone chirp.
BRUS_display.book Page 38 Monday, January 16, 2012 5:28 PM
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
To Next Page
Loading...
Need help?
General
