GETTING STARTED
English
39
End of Transmission Tone (Roger Beep
Tone)
Short press the SB1 button while turning ON
the radio to enable/disable End of
Transmission Tone.
Note: This setting is set to OFF by default
Keypad Beeps
Keypad Beeps can be enabled/disabled by
short pressing SB2 button (until radio ‘chirps’)
while turning ON the radio.
Keypad Lock/Unlock
You can lock the keypad to avoid accidentally
changing your radio settings. Press and hold
MENU for 4 seconds to lock the radio keypad.
To unlock, press MENU for 4 seconds.
Note: The only buttons that cannot be locked
using this feature are the PTT button and
Button A (if Call Tone feature has been
assigned).
MENU Options
To enter MENU, short press MENU button. The
radio will take you to the next feature option.
For each feature, you can navigate with the
/ buttons. After selecting your desired
settings, you can:
• press MENU to save and go to the next
option,
• long press the PTT button to save and exit or
• turn OFF the radio to exit without saving
changes.
When there is no activity for more than ten
seconds, MENU mode will time out.
BRUS_display.book Page 39 Monday, January 16, 2012 5:28 PM
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
To Next Page
Loading...
Need help?
General
