PROGRAMMING
FEATURES
English
53
The CPS allows the user to program
frequencies, PL/DPL codes, as well as other
features such as: Direct Frequency Input*,
Repeater/Talkaround*, Time-out Timer, Power
Select, Battery Type Select, Scan List, Call
Tones, Scramble, Reverse Burst etc. CPS is a
very useful tool as it can also lock the front-
panel radio programming or restrict any
specific radio feature to be changed (to avoid
preset radio values from being accidentally
erased). It also provides security by giving the
option to set up a password for profile radio's
management. Please refer to Features
Summary Chart Section at the end of the user
guide for details.
Notes:
• (*) CPS Programming Cable (P/N RKN4155)
is an accessory sold separately. Please
contact your Motorola Point of Purchase for
more information.
Bandwidth Select
Default setting for Bandwidth Select depends
on the specific frequency and channel. For
details refer to ‘Frequencies and Codes Charts’
Section.Some frequencies have selectable
channel spacing, which must match other
radios for optimum audio quality.
Time-Out Timer
When PTT button is pressed, transmissions
can be terminated by setting up a 'time-out’
timer.
Power Select
Power Select allows you to select the radio
between high and low transmission power per
frequency in each channel. The power levels
for RDX™ series 2W toggle between 1W and
2W or 2W and 4W/5W depending on the radio
model .
BRUS_display.book Page 53 Monday, January 16, 2012 5:28 PM
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
To Next Page
Loading...
Need help?
General
