PROGRAMMING
FEATURES
English
47
PROGRAMMING MICROPHONE GAIN
LEVEL
To configure the microphone gain level, enter
’Programming Mode’ and scroll through the
programming options by short pressing the
PTT button. When you reach the ‘Microphone
Gain Level Programming Mode’ the display will
read as follows:
The current microphone gain level setting will
blink. You can select the desired microphone
gain level by pressing the / buttons
(1=low gain,2= Medium gain or 3= high gain).
Once you have selected the gain level you
want to program, long press the PTT button to
exit and save or short press the PTT button to
move to the next programming feature without
saving.
Note: The values available for microphone gain
level are dependent upon maximum levels
the radio supports.
PROGRAMMING MICROPHONE
ACCESSORY GAIN LEVEL
To configure the Accessory Microphone Gain
Level, enter ’Programming Mode’ and scroll
through the programming options by short
pressing the PTT button.
The current accessory microphone gain level
setting will be blinking. You can select the
desired gain level (1=Low gain,2= Medium gain
or 3= High gain) by pressing the /
buttons.
Once you have selected the gain level you
want to program, long press the PTT button to
IMIC
MIC
BRUS_display.book Page 47 Monday, January 16, 2012 5:28 PM
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
To Next Page
Loading...
Need help?
General
