GETTING STARTED
English
40
Setting VOX / iVOX sensitivity
The VOX/iVOX sensitivity can be adjusted via
the MENU as well as the CPS. To modify via
the MENU, first make sure you have enabled
either VOX or iVOX (See “Hands-Free Use/
VOX” on page 37.). Once VOX/iVOX has been
enabled, short press MENU.
If you have iVOX enabled and press MENU,
your radio will display the following:
If you have VOX enabled (with accessory
connected) and press MENU, your radio will
display the following:
To change the sensitivity level, use the /
buttons:
0 = OFF (For VOX accessories only)
1 = Low sensitivity
2 = Medium sensitivity
3 = High sensitivity
Once you have selected the value you want,
press MENU again to go to the next step or
turn OFF radio to exit without saving changes.
Default value for VOX sensitivity is medium
and for IVOX is high.
IVOX
VOX
BRUS_display.book Page 40 Monday, January 16, 2012 5:28 PM
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
To Next Page
Loading...
Need help?
General
