Motorola RMU2040 User Manual

PROGRAMMING
FEATURES
English
34
PROGRAMMING
FEATURES
To easily program all the features in your radio,
it is recommended to use the Costumer
Programming Software (CPS) and
programming cable.
CPS software download is available for free
at www.motorolasolutions.com/RMseries
Advanced Configuration
Advanced Configuration is a configuration
mode that allows the customization of
additional features via the front panel.
When the radio is set to Advanced
Configuration, you are able to read and modify
four features:
•
Frequency Selection
•
CTCSS/DPL Codes
•
Auto-Scan.
The Frequency Select feature allows you to
choose frequencies from a pre-defined list.
The Interference Eliminator Code (CTCSS/
DPL) helps minimize interference by providing
you with a choice of code combinations that
filter out static, noise, and unwanted
messages.
The Auto-Scan feature allows you to set a
particular channel to automatically enable Scan
each time you switch to that channel.
The non-display models don't have a display
to show programmed values, then
navigation is guided via voice prompt.
•
Active Channels
The Active Channels feature allows you to
increase or decrease the amount of channels
active (In the range of maximum channels).

Motorola RMU2040 Specifications

General

Frequency Band	UHF
Frequency Range	450-470 MHz
Channels	4
IP Rating	IP54
Range	Up to 250, 000 sq. ft. / 20 floors
Weight	8.6 oz (with battery)
Dimensions	4.5 x 2.2 x 1.5 in (115.6 x 57.6 x 38.6 mm)