Motorola RMU2040 User Manual

PROGRAMMING
FEATURES
English
42
•
Short press the PTT button to enter Frequency
Programming Selection Mode. Radio will
announce current value ‘2’
• Press SB1 button eleven times to scroll up the
frequency list and you will hear frequency "13"
Long press the PTT button. LED Indicator will
show a green heartbeat to indicate 'Idle' state.
Long press the PTT button to exit Programming
Mode or turn radio OFF.
Example of Programming a Code
Assuming current code value is set to factory
default ‘001’, and you want to change it to
CTCSS/DPL Code = 103 follow the sequence
below:
• Enter into Advanced Configuration Mode
•
Short press the PTT button twice and you will
hear "Code #" (Entering CTCSS/DPL
Programming Selection Mode).
•
Press and hold SB1 or SB2, selections shall
fast forward/rewind starting at the nearest 10's,
when released the radio starts playing the first,
second and third digit in full, keep pressing SB1/
SB2 several times until you hear "103"
Long press the PTT button. LED Indicator will
show a green heartbeat to indicate 'Idle' state.
Long press the PTT button to exit Programming
Mode or turn radio OFF.
•
•
•
•

Motorola RMU2040 Specifications

General

Frequency Band	UHF
Frequency Range	450-470 MHz
Channels	4
IP Rating	IP54
Range	Up to 250, 000 sq. ft. / 20 floors
Weight	8.6 oz (with battery)
Dimensions	4.5 x 2.2 x 1.5 in (115.6 x 57.6 x 38.6 mm)