Motorola RMU2040 User Manual

PROGRAMMING
FEATURES
English
51
CPS and Cloning Cables (Optionals)
•
CPS Cable
Both CPS and Cloning cables are made to
work either with RM Series radios or RDX
series. Cloning cable also can work with a
mix of RDX and RM radios.
The CPS cable is made to program RM
series radio when the switch is in "Flash"
position. If you want to use the CPS cable
to program an RDX radio, make sure the
switch is in "CPS" position and attach a
USB convertor provided as part of the CPS
cable kit.
•
Cloning cable allows you to clone:
- RM Series, make sure the switch is in
"Cloning" position.
- RDX radios, make sure the switch is in
"Legacy" position there is one USB
converter attached on each side.
- RM and RDX radios, make sure the switch
is in "Legacy" position and use a USB
converter to connect to the RDX SUC.
Cloning cable kit provides 1 USB convertor.
•
Cloning Cable
Micro-to-Mini USB Convertor
USB Converter

Motorola RMU2040 Specifications

General

Frequency Band	UHF
Frequency Range	450-470 MHz
Channels	4
IP Rating	IP54
Range	Up to 250, 000 sq. ft. / 20 floors
Weight	8.6 oz (with battery)
Dimensions	4.5 x 2.2 x 1.5 in (115.6 x 57.6 x 38.6 mm)