9.4 Using Caller ID
54 Calling Features
Your phone automatically redials the number. When the call
goes through, your phone rings or vibrates one time,
displays Redial Successful, and then connects the call.
9.4 Using Caller ID
9.4.1 Incoming Calls
Calling line identification (Caller ID) displays the phone
number for incoming calls.
The phone displays the caller’s name (and picture, if
available) if the name is stored in your phonebook, or
Incoming Call when caller ID information is not available.
You can also set your phone to play a distinctive Ringer ID for
specific entries stored in your phonebook. For more
information, see page 67.
9.4.2 Outgoing Calls
You can show or hide your phone number as an ID for the
calls that you make.
While dialling (with digits visible in the display), press
M
> Hide ID/Show ID.
9.5 Turning Off a Call Alert
You can turn off your phone’s incoming call alert before
answering the call.
9.6 Calling an Emergency Number
Your service provider programs one or more emergency
phone numbers, such as 999, that you can call under any
circumstances, even when your phone is locked or the SIM
card is not inserted. Your service provider can program
additional emergency numbers into your SIM card. However,
your SIM card must be inserted in your phone in order to use
the numbers stored on it. See your service provider for
additional information on this issue.
Note: Emergency numbers vary by country. Your phone’s
preprogrammed emergency number(s) may not work in all
locations, and sometimes an emergency call cannot be
placed due to network, environmental, or interference issues.
Press To
either volume key turn off the alert
To Next Page
Loading...
Need help?
General
