4-8
Advanced BIOS Features
Quick Booting
Setting the item to [Enabled] allows the system to boot within 5 seconds since it will skip
some check items. Available options: [Enabled], [Disabled].
Boot Sequence
Press <Enter> and the following sub-menu appears:
1st/2nd/3rd Boot Device
These items allow you to set the sequence of boot devices where BIOS attempts
to load the operating system.
Boot From Other Device
Setting the option to Enabled allows the system to try to boot from other device
if the system fails to boot from the 1st/2nd/3rd boot device.
Hard Disk Boot Priority
Press <Enter> and the following sub-menu appears:
MSI Reminds You...
Available settings for “1st/2nd/3rd Boot Device” vary depending on
the bootable devices you have installed. For example, if you did not
install a floppy drive, the setting “Floppy” will not show up.
To Next Page
Loading...
Need help?
General
