Multiplex ALBI 4 Series User Manual

41
Section 4
Insert the tabs in the rear of the font into the
mating slots in the front panel and push the font
down to relocate the font on the front of the
appliance
Replace and tighten the two screws holding the
dispense valve in position.
Replace and tighten the screw holding securing the
top of the font to the front panel.
Replace and tighten the four screws holding
securing the bottoms of the font to the front
panel.

Multiplex ALBI 4 Series Specifications

General

Brand	Multiplex
Model	ALBI 4 Series
Category	Dispenser
Language	English