© National Instruments | 1-3
X Series User Manual
Installation
Before installing your DAQ device, you must install the software you plan to use with the device.
1. Installing application software—Refer to the installation instructions that accompany
your software.
2. Installing NI-DAQmx—The DAQ Getting Started guides, packaged with NI-DAQmx and
also on ni.com/manuals, contain step-by-step instructions for installing software and
hardware, configuring channels and tasks, and getting started developing an application.
3. Installing the hardware—Unpack your X Series device as described in the
Unpacking
section. The DAQ Getting Started guides describe how to install PCI Express, PXI Express,
and USB devices, as well as accessories and cables.
Unpacking
The X Series device ships in an antistatic package to prevent electrostatic discharge (ESD). ESD
can damage several components on the device.
Caution Never touch the exposed pins of connectors.
To avoid ESD damage in handling the device, take the following precautions:
• Ground yourself with a grounding strap or by touching a grounded object.
• Touch the antistatic package to a metal part of your computer chassis before removing the
device from the package.
Remove the device from the package and inspect it for loose components or any other signs of
damage. Notify NI if the device appears damaged in any way. Do not install a damaged device
in your computer or chassis.
Store the device in the antistatic package when the device is not in use.
⬉ᄤֵᙃѻક∵ᶧࠊㅵ⧚ࡲ⊩˄Ё˅
Ёᅶ᠋
National Instruments
ヺড়Ё⬉ᄤֵᙃѻકЁ䰤ࠊՓ⫼ᶤѯ᳝ᆇ⠽䋼ᣛҸ
(RoHS)
DŽ݇Ѣ
National Instruments
Ё
RoHS
ড়㾘ᗻֵᙃˈ䇋ⱏᔩ
ni.com/
environment/rohs_china
DŽ
(For information about China RoHS compliance,
go to
ni.com/environment/rohs_china
.)
To Next Page
Loading...
Need help?
General
