NetComm Wireless NF10W User Guide
WAN
The WAN page shows more detailed information related to the WAN interface configuration, including the firewall status, IPv4 and
IPv6 addresses of the router.
The Interface of the WAN connection.
The description of the WAN connection.
The type of WAN connection.
Details the status of VLAN Mux ID if used.
Details the status of IGMP on each WAN connection. IGMP is only used with IP v4
connections. IGMP proxy enables the router to issue IGMP host messages on behalf
of hosts that the router discovered through standard IGMP interfaces, allowing NAT
transversal of Multicast traffic.
Details the status of IGMP Src on each WAN connection. IGMP Sources function
send a membership report that includes a list of IGMP source addresses.
Shows the status of the Multicast Listener Discovery protocol when IPv6 is in use.
Multicast Listener Discovery (MLD) proxy enables the router to issue MLD host
messages on behalf of hosts that the router discovered through standard MLD
interfaces.
Details the status of MLD Src on each WAN connection. MLD Sources function can
send a membership report that includes a list of MLD source addresses.
The NAT status of the WAN connection.
The status of the router firewall across the WAN connection.
The status of the WAN connection.
The current IP v4 address of the WAN connection.
The current IP v6 address of the WAN connection.
Statistics
LAN
The Statistics – LAN page shows detailed information about the number of bytes, packets, errors and dropped packets on each
LAN interface in both directions of communication.
Rx/Tx (receive/transmit) packets in bytes.
Rx/Tx (receive/transmit) packets.
Rx/Tx (receive/transmit) packets with errors.
Rx/Tx (receive/transmit) packets with drops.
Statistics – WAN Service
The Statistics – WAN Service page shows detailed information about the number of bytes, packets, errors and dropped packets on
the WAN interface in both directions of communication.
To Next Page
Loading...
Need help?
General
