NetComm Wireless NF10W User Guide
Device Info
Summary
When you log in to the router, the Device Info Summary page is displayed, giving a general overview of the status of the router and
the WAN connection.
Indicates that NetComm Wireless is the manufacturer of this product.
The model of the product.
The unique set of numbers assigned to the routers for identification purposes.
The date and time that the software running on the router was published.
The current firmware version installed on the router.
The current boot loader installed on the router.
DSL PHY and Driver Version
The driver version of the on-board DSL chip.
The VDSL profile in use. Supports 8a, 8b, 12a and 17a VDSL profiles.
DSL PHY and Driver Version
The current line driver installed on the router.
The current wireless driver installed on the router.
The number of days, hours and minutes that the router has been running.
Line Rate – Upstream (Kbps)
The current upstream speed of the DSL connection in Kbps.
Line Rate – Downstream (Kbps)
The current upstream speed of the DSL connection in Kbps.
The current version 4 LAN IP address assigned to the router.
Displays whether the WAN connection is ADSL/VDSL or Ethernet WAN.
The current default gateway of the WAN interface.
The current primary DNS server in use
The current secondary DNS server is use.
The current IPv6 LAN IP address in use if assigned.
The current IPv6 default gateway if assigned.
The current date and time set on the router.