Product features
Featuring a VDSL2/ADSL2+ modem and a Gigabit WAN port, you can choose whether you connect to the Internet via DSL or a
fibre service. If you don’t have a fibre connection, the Gigabit WAN port will have you protected should you choose to update in the
future. With uncertainty around the future of the NBN, NetComm Wireless will have you covered should the network connection
switch to VDSL.
This router also includes 2 x USB host ports that can be used to connect USB devices so that their capabilities can be shared with
all connected users. Connect a USB hard drive so that all files stored can be accessed and shared.
All of these features can be shared with multiple users via the built-in wireless access point or the four Ethernet LAN ports. The high
speed Wireless N provides a signal strong enough to penetrate the far corners of a house and can connect all WiFi enabled devices,
such as laptops, smartphones, gaming consoles, tablets and PCs. The four Fast Ethernet ports provide a wired connection that can
be used to connect desktop computers, media devices or any Ethernet equipped product.
Note: Maximum wireless signal rate and coverage values are derived from IEEE Standard 802.11g, and 802.11n specifications. Actual wireless speed and
coverage are dependent on network and environmental conditions included but not limited to volume of network traffic, building materials and
construction/layout.
.
To Next Page
Loading...
Need help?
General
