NetComm Wireless NF17ACV User Guide
SIP Debug Setting
This page allows you to configure various settings regarding the logging levels of the SIP service.
SIP Log Server IP Address
Enter the Log Server IP address where the SIP Log data for the router will be sent to.
Enter the port to be used for transmitting the SIP Log data.
The incoming signal amplitude can be controlled with this field. Combined with the Egress gain a ratio can be
expressed of input to output. The Ingress Gain setting can help improve the quality of the VoIP line, and can
influence call volumes and help eliminate echoes.
The outgoing signal amplitude can be controlled with this field. Combined with the Ingress gain a ratio can be
expressed of input to output. The Egress Gain setting can help improve the quality of the VoIP line, and can
influence call volumes and help eliminate echoes.