NETGEAR C7800 User Manual

Supplemental Information
111
AC3200 WiFi Cable Modem Router
Factory Settings
You can return the modem router to its factory settings. Use the end of a paper clip or a
similar object to press and hold the Reset button on the back of the modem router for at least
seven seconds. The modem router resets, and returns to the factory configuration settings
shown in the following table.
Table 4. Factory default settings
Feature Default behavior
Modem router
login
User login URL www.routerlogin.com, www.routerlogin.net, or
192.168.0.1
User name (case-sensitive) admin
Login password (case-sensitive) password
Local network
(LAN)
LAN IP 192.168.0.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP range 192.168.0.2 to 192.168.0.254
DMZ Disabled
Time zone ISP/MSO ToD (time of day) configuration
SNMP Enabled
Cable modem
firewall
Inbound (communications coming
in from the Internet)
Disabled (except traffic on port 80, the HTTP port)
Outbound (communications going
out to the Internet)
Enabled (all)
WiFi WiFi communication Enabled
SSID name See the modem router label
Security WPA2-PSK (AES)
Broadcast SSID Enabled
WiFi (continued) Country/region United States
RF channel (2.4 GHz) Auto
1
1. Maximum WiFi signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network conditions
and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower
actual data throughput rate.
RF channel (5 GHz) CH 153 (or manually select Band I and 4 Channels)
Operating mode Up to 1000 Mbps at 2.4 GHz, 2167 Mbps at 5 GHz

NETGEAR C7800 Specifications

General

Brand	NETGEAR
Model	C7800
Category	Network Router
Language	English