NETGEAR FS 726 User Manual

2-3physical description
Figure 2-2.Front and Back Panels of the FS750 Switch
10/100 Mbps RJ-45 Ports
As Figures 2-1 and 2-2 show, the FS726 Switch has 24 RJ-45 ports, while the FS750
Switch has 48 RJ-45 ports.These are auto-sensing 10/100 Mbps ports: when you
insert a cable into an RJ-45 port, the switch automatically detects the maximum speed
(10 or 100 Mbps) and duplex mode (half- or full-duplex) of the attached device, and
displays this information using the front panel 100 Mbps and FDX LEDs for that port
(LEDs are described in the next section).The 10/100 Mbps ports support only unshield-
ed twisted-pair (UTP) cable terminated with an 8-pin RJ-45 plug.
10/100 Mbps
ports
Front Panel of the Model FS750 Switch
Rear Panel of the Model FS750 Switch
Module Bays
LED Mode
Button
Reset
Button
Power
LED
Link LEDs
Mode LEDs

NETGEAR FS 726 Specifications

General

Brand	NETGEAR
Model	FS 726
Category	Network Router
Language	English