NETGEAR Orbi RBS50Y User Manual

The following is the LED behavior during booting:
• Pulsing white.The satellite is booting.
• Solid white.The satellite finished booting and is ready to sync with your router.
4. Press the Sync button on the back of your satellite, and within two minutes, press the Sync button on
the back of your Orbi router.
5. Wait for the satellite to sync with the router.
The bottom Light LED on the satellite lights white while it attempts to sync with your Orbi router. It might
take about six minutes for your satellite to sync.
After the bottom Light LED lights white, it lights one of the following colors for about three minutes and
then turns off:
• Blue.The Orbi router and satellite successfully synced, and the connection between the router and
satellite is good.
• Amber.The Orbi router and satellite successfully synced, and the connection between the router
and satellite is fair. Consider moving the Orbi satellite closer to the Orbi router.
• Magenta.The Orbi router and satellite failed to sync. Move the satellite closer to the router and try
again.
6. Move your satellite outdoors and connect it to a power source.
The recommend temperature range for your satellite is 4°F to 122°F (–20°C to +50°C).Note
7. Make sure that the bottom Light LED lights blue to indicate a good connection to the router.
Sync Your Satellite Using the Router Web Interface
You can use the router web interface to add a satellite to your Orbi network.
To add a satellite to your Orbi network using the router web interface:
1. Launch a web browser from a computer or mobile device that is connected to your Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select Add Orbi Satellite.
The Place Your Satellite page displays.
5. Follow the instructions for where to place your satellite in your house.
Overview
13
Orbi Outdoor Satellite

NETGEAR Orbi RBS50Y Specifications

General

Maximum transfer distance	232 m
Antenna type	Internal
Antennas quantity	6
Mounting type	Wall
Product color	White
Output current	2.5 A
Output voltage	12 V
External power adapter	Yes

Weight and Dimensions

Depth	68.58 mm
Width	210.82 mm
Height	269.24 mm
Weight	1387.993 g