NETGEAR Orbi RBS50Y User Manual

Factory Settings
The following table shows the factory default settings for the Orbi Outdoor Satellite.
Table 3. Factory default settings for the satellite
Default SettingFeature
orbilogin.comUser login URLRouter
login
adminUser name (case-sensitive)
passwordDefault login password
(case-sensitive)
Use default hardware addressWAN MAC addressInternet
connection
1500WAN MTU size
AutoSensingPort speed
192.168.1.250LAN IPLocal
network
(LAN)
255.255.255.0Subnet mask
DisabledDHCP server
GMT for WW except NA and GR,
GMT+1 for GR, GMT-8 for NA
Time zone
DisabledTime zone adjusted for daylight
saving time
DisabledSNMP
Disabled (except traffic on port
80, the HTTP port)
Inbound (communications coming
in from the Internet)
Firewall
Enabled (all)Outbound (communications going
out to the Internet)
DisabledSource MAC filtering
EnabledWiFi communicationWiFi
See satellite labelSSID name
WPA2-PSK (AES)Security
EnabledBroadcast SSID
Auto
1
Transmission speed
United States in the USCountry/region
2.4 GHz front and back haul: Auto
5 GHz front haul: Channel 48
5 GHz back haul: Channel 157
RF channel
1
Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network
overhead, lower actual data throughput rate.
Supplemental Information
27
Orbi Outdoor Satellite

NETGEAR Orbi RBS50Y Specifications

General

Maximum transfer distance	232 m
Antenna type	Internal
Antennas quantity	6
Mounting type	Wall
Product color	White
Output current	2.5 A
Output voltage	12 V
External power adapter	Yes

Weight and Dimensions

Depth	68.58 mm
Width	210.82 mm
Height	269.24 mm
Weight	1387.993 g