NETGEAR R7300DST User Manual

3
LED Description
Ethernet ports
1–4 LED
The LED color indicates the speed: white for Gigabit
Ethernet connections and amber for 100 Mbps or 10
Mbps Ethernet connections.
• Solid. A powered-on device is connected to the
Ethernet port.
• Blinking. The port is sending or receiving trac.
• O. No device is connected to this Ethernet port.
DST LED
• Solid blue. A DST adapter is connected to the
DST router’s network.
• O. The DST router did not find any other compatible
DST adapter using the same encryption key.
WPS and DST
Adapter Sync
button with LED
Pressing this button for two seconds turns on the WPS
function and the DST adapter sync connection. Aer you
press this button, press the WPS or
WPS and DST Router
Sync
button on your device to connect your device to the
DST router.
• Solid white. A device is connected to the DST router.
• Blinking white. The DST router is ready to sync with a
device.
• O. The WPS and DST adapter sync connection is o.
Geek Squad Setup
and Support
button with LED
Geek Squad support is provided by phone and on the web.
Geek Squad agents use remote access to assist with setup
and support. The Geek Squad Setup and Support button
paired with a Geek Squad support ID (on the bottom of the
router) is used to authenticate the connection for remote
access.
The agent will provide direction regarding the use of the
button and the code. Pressing the button any other time
does not result in a connection with an agent.
The state of the LED indicates the status of the connection
with the Geek Squad agent:
• Solid white. The DST router is connected to Geek
Squad Support.
• Blinking white. The connection is being established.
• O. Geek Squad Support is not connected.

NETGEAR R7300DST Specifications

General

Brand	NETGEAR
Model	R7300DST
Category	Network Router
Language	English