To Next Page

To Previous Page

DST Router LEDs

The LEDs on the top of the DST router light to indicate DST router

activity:

LED Description

Power LED

• Solid white. The DST router is ready.

• Solid amber. The DST router is starting.

• Blinking amber. The ﬁrmware is upgrading, or the

Reset button was pressed.

• Blinking white. The ﬁrmware is corrupted.

• O. Power is not supplied to the router.

Internet LED

• Solid white. The Internet connection is ready.

• Solid amber. The DST router detected an Ethernet

cable connection to the modem.

• Blinking white. The port is sending or receiving trac.

• O. No Ethernet cable is connected between the

DST router and the modem.

2.4 GHz WiFi LED

• Solid white. The 2.4 GHz WiFi radio is operating.

• Blinking white. The DST router is sending or receiving

WiFi trac.

• O. The 2.4 GHz WiFi radio is o.

5 GHz WiFi LED

• Solid white. The 5 GHz WiFi radio is operating.

• Blinking white. The DST router is sending or receiving

WiFi trac.

• O. The 5 GHz WiFi radio is o.

USB 1 LED

USB 2 LED

The USB 1 LED is for the blue USB 3.0 USB port. The USB

2 LED is for the USB 2.0 port.

• Solid white. A USB storage device is connected and is

ready.

• Blinking. A USB storage device is plugged in and is

trying to connect.

• O. No USB storage device is connected, or someone

clicked the Safely Remove Hardware button on the

DST router’s web interface and it is now safe to remove

the attached USB storage device.

NETGEAR R7300DST User Manual

Questions and Answers: