124
Technical Notes
Error Messages
The following table lists the error messages and other warnings displayed in the
monitor, as well as the solutions for dealing with them.
Display Problem Solution A
O (blinks) Clock not set. Set clock. 106
B Batteries running low. Prepare to change
batteries.
12
N
Warning!
Battery exhausted.
Batteries exhausted. Change batteries. 12
P
Warning!!
Please wait for the
camera to finish
recording.
O
Camera cannot perform
other operations until
recording is complete.
Wait until message clears
from display automatically
when recording is
complete.
23
N
Memory card is write
protected.
Write-protect switch is in
“lock” position.
Slide write-protect switch
to “write” position.
17
P
This card cannot be used.
Error accessing memory
card.
• Use approved card.
• Check that connectors
are clean.
• Confirm that memory
card is correctly inserted.
119
16
16
P
Warning!
This card cannot be
read.
P
Card is not formatted.
Format card?
No
Yes
Memory card has not been
formatted for use in
camera.
Choose [Yes] and press k
to format card, or turn
camera off and replace
card.
17
N
Out of memory.
Memory card is full. • Choose lower image
quality or smaller image
size.
• Delete pictures or sound
files.
• Insert new memory card.
• Remove memory card
and use internal
memory.
81, 82
24, 61,
64, 101
16
17
To Next Page
Loading...
Need help?
General
Weight and Dimensions
