46
More on Playback
Taking a Closer Look: Playback Zoom
Pressing g (i) during full-frame playback mode (A 24)
zooms the current picture in 3×, with the center of the
picture displayed in the monitor (Quick Playback Zoom).
The guide at lower right shows which portion of the
picture is enlarged. Change the portion of the picture
displayed by pressing the multi selector H, I, J or K.
When using playback zoom with pictures shot using
the face-priority function (A 94), the picture will be
enlarged, with the face recognized during shooting, at
the center of the monitor. If more than one face was
recognized, the picture would be enlarged with the face,
on which focus was acquired, at the center of the
monitor. Press the multi selector H, I, J, or K to display
a different recognized face.
The magnification ratio can be changed further by
operating the zoom buttons. The zoom ratio will be
displayed in the monitor, and can be increased up to 10
×.
The following operations can be performed while pictures
are zoomed in.
To Use Description A
Zoom in g (i)Press g (i). –
Zoom out f (h)
Press f (h).
When the magnification ratio reaches 1×, the
display returns to full-frame playback mode.
–
View other areas
of picture
Press the multi selector H, I, J or K to move
to areas of the picture not visible in the monitor.
9
Switch to full-
frame playback
k
Press k.24
Crop picture
d
Press d to crop current picture to contain only
the portion visible in the monitor.
51
Switch to
shooting mode
c
Press c or the shutter-release button to switch
to the mode selected with the mode dial.
24
3.0
2.0
4.0
To Next Page
Loading...
Need help?
General
Weight and Dimensions
