68
Connecting to a Computer
Connecting to Televisions, Computers and Printers
Transferring Pictures from the Camera to a Computer
1 Start the computer to which Nikon Transfer has been installed.
2 Turn off the camera.
3 Connect the camera to the computer using the supplied USB cable.
4 Turn on the camera.
Windows Vista
When the AutoPlay dialog is displayed, select [Copy
pictures to a folder on my computer using Nikon
Transfer]. Nikon Transfer will start. To bypass this dialog in
the future, check [Always do this for this device:].
Windows XP
When the AutoPlay dialog is displayed, select [Nikon Transfer Copy pictures to a folder
on my computer] and click [OK]. Nikon Transfer will start. To bypass this dialog in the
future, check [Always use this program for this action.].
Mac OS X
Nikon Transfer will start automatically if [Yes] was selected in the Auto-Launch setting
dialog when Nikon Transfer was first installed.
B Connecting the USB Cable
Be sure that the connectors are oriented correctly, and do not use force, to connect the USB cable.
When disconnecting the USB cable, do not pull the connector at an angle.
Connection may not be recognized when the camera is connected to a computer via a USB hub.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
