336
U
❚❚ Playback Mode
❚❚ Live View
If Restart standby timer is selected, operating the multi selector
when the standby timer expires (0 44) will activate the meters and
start the standby timer.
If Do nothing is selected, the timer will not
start when the multi selector is pressed.
Option Role assigned to center of multi selector
n
Thumbnail on/off Toggle between full-frame and thumbnail playback.
o
View histograms
In both full-frame and thumbnail playback,
a histogram is displayed while the center of the
multi selector is pressed.
p
Zoom on/off
Toggle between full-frame or thumbnail playback
and playback zoom.
Choose the initial zoom setting
from Low magnification (50%), 1 : 1 (100%), and
High magnification (200%).
The zoom display will
center on the active focus point (if the picture was
taken in viewfinder photography) or on the center
of the image (if the picture was taken during live
view).
u
Choose slot and
folder
Display the slot and folder selection dialog (0 242).
Option Role assigned to center of multi selector
J
Select center
focus point
Pressing the center of the multi selector in live view
selects the center focus point.
p
Zoom on/off
Press the center of the multi selector to toggle zoom
on and off.
Choose the initial zoom setting from
Low magnification (50%), 1 : 1 (100%), and High
magnification (200%).
The zoom display will
center on the active focus point.
None
Pressing the center of the multi selector has no
effect in live view.
f2: Multi Selector
G button ➜ A Custom Settings menu
To Next Page
Loading...
