418
n
2 Select Clean now.
Highlight Clean now and
press J.
The camera will check the
image sensor and then
begin cleaning.
During
cleaning, 1 flashes in
the top control panel and
other operations can not
be performed.
Do not
remove or disconnect the
power source until
cleaning is complete and
1 is no longer
displayed.
❚❚ “Clean at Startup/Shutdown”
Choose from the following options:
Option Description
5 Clean at startup
The image sensor is automatically cleaned each time
the camera is turned on.
6
Clean at
shutdown
The image sensor is automatically cleaned during
shutdown each time the camera is turned off.
7
Clean at startup
& shutdown
The image sensor is cleaned automatically at startup
and at shutdown.
Cleaning off Automatic image sensor cleaning off.
J button
To Next Page
Loading...
