109
Choose this mode to minimize blurring caused by camera
movement when the mirror is raised.
To use mirror-up mode,
press the release mode dial lock release and rotate the release
mode dial to V (mirror up).
After pressing the shutter-release button halfway to set focus
and exposure, press the shutter-release button the rest of the
way down to raise the mirror and then press the shutter-release
button all the way down again to take the picture. The mirror
lowers when shooting ends.
Mirror up Mode (V)
D Mirror Up
While the mirror is raised, photos can not be framed in the viewfinder
and autofocus and metering will not be performed.
A Mirror up Mode
A picture will be taken automatically if no operations are performed for
about 30 s with the mirror raised.
A Preventing Blur
To prevent blurring caused by camera movement, press the shutter-
release button smoothly, or use an optional remote cord (0 443). For
information on using the optional ML-L3 remote control for mirror-up
photography, see page 193. Use of a tripod is recommended.
Release mode dial lock release
Release mode dial
To Next Page
Loading...
