216
Follow the steps below to record a series of two or three
exposures in a single photograph.
Multiple exposures can make
use of RAW data from the camera image sensor to produce
colors noticeably superior to those in software-generated
photographic overlays.
❚❚ Creating a Multiple Exposure
Multiple exposures can not be recorded in live view.
Exit live
view before proceeding. Note that at default settings, shooting
will end and a multiple exposure will be recorded automatically
if no operations are performed for 30 s.
1 Select Multiple exposure.
Highlight Multiple exposure in the
photo shooting menu and press 2.
Multiple Exposure (P, S, A, and M Modes Only)
A Extended Recording Times
For an interval between exposures of more than 30 s, extend the
meter-off delay using Custom Setting c2 (Standby timer, 0 336).
The
maximum interval between exposures is 30 s longer than the option
selected for Custom Setting c2.
If the monitor turns off during
playback or menu operations and no operations are performed for 30 s
after the standby timer has expired, shooting will end and a multiple
exposure will be created from the exposures that have been recorded
to that point.
To Next Page
Loading...
