365
Selecting Ye s allows adjustments that are normally made by
holding a button and rotating a command dial to be made by
rotating the command dial after the button is released.
Setting
ends when the button is pressed again, the shutter-release
button is pressed halfway, or the standby timer expires. This
option is available with the following buttons:
1When assigned non-CPU lens number selection, Active D-Lighting, HDR, or exposure delay
mode using Custom Setting f2.
2When assigned non-CPU lens number selection, Active D-Lighting, HDR, or exposure delay
mode using Custom Setting f3.
3When assigned non-CPU lens number selection using Custom Setting f4.
4When assigned white balance or ISO sensitivity using Custom Setting f9.
Selecting Enable release allows the shutter to be released when
no memory card is inserted, although no pictures will be
recorded (they will however be displayed in the monitor in
demo mode).
If Release locked is selected, the shutter-release
button is only enabled when a memory card is inserted in the
camera.
f6: Release Button to Use Dial
G button ➜ A Custom Settings menu
Button 0
E 143
M (Y)180, 182
W (S)134
X (T)116, 118
L (U)
146, 150, 154,
156, 159
AF mode button
57, 59, 121,
125
Z (Q)140
D 202
Fn
1
360
Pv
2
361
A AE-L/AF-L
3
362
Movie-record
button
4
366
Button 0
f7: Slot Empty Release Lock
G button ➜ A Custom Settings menu