377
Use the multi selector as shown below to
adjust monitor color balance with
reference to a sample image.
The sample
image is the last photograph taken or, in
playback mode, the last photograph
displayed; to choose a different image,
press the W (S) button and select an
image from a thumbnail list (to view the
highlighted image full frame, press and
hold X/T).
If the memory card
contains no photographs, an empty
frame with a gray border will be
displayed in place of the sample image.
Press J to exit when adjustments are complete.
Monitor color
balance applies only to menus, playback, and the view through
the lens displayed during live view photography and movie live
view; pictures taken with the camera are not affected.
Monitor Color Balance
G button ➜ B setup menu
Increase amount of green
Increase amount of blue Increase amount of amber
Increase amount of magenta
To Next Page
Loading...
