MOUNTING
THE
LENS
1
12
Remove camera body cap and front
and rear lens caps.
2
Position the lens
in
the camera's
bayonet mount so that the
mounting indexes on lens and camera
body are aligned. Taking care not
to
press the lens release button, twist lens
counterclockwise until it locks into place.
• When mounting/removing lens, make sure that the camera's power
is
turned
off and avoid direct sunlight.
• See page 104 for Nikon lens compatibility chart.
To remove
Push and hold lens release button and
turn lens clockwise.
To Next Page
Loading...
Need help?
General
