FLEXIBLE PROGRAM
If you want
to
change the shutter speed/aperture combination
of
Auto Multi-Program. use the Flexible Program function.
Flexible Program enables you
to
temporarily change an
automatically set shutter speed/aperture combination
in
1
EV
steps. while maintaining the correct exposure.
1.
Lightly press shutter release button.
,
0
--)~
:
{
60
Fa
)
II
I
2.
Turn command dial until desired shutter speed or aperture
value appears
in
viewfinder and
in
LCD panel. The exposure
mode indicator
(
p)
blinks
to
indicate the program has been
shifted or changed.
• The shifted program is maintained as long as the exposure
meter stays on. unless you turn the command dial
to
the
previous shutter speed/aperture. As soon as the meter
switches off
(i.e
.. the viewfinder and LCD panel displays
disappear). Flexible Program is cancelled.
Flexible Program is also cancelled when you switch the
exposure mode to another mode. readjust the camera
settings or turn off the power switch.
• Flexible Program cannot be used with Vari-Program. When
p,
is
selected. the procedure just explained does not shift
the shutter speed/aperture combination.
55
To Next Page
Loading...
Need help?
General
