Focus lock
g
When your subject is not in the center of the viewfinder, use focus
lock.
1 Place the main subject within the autofocus frame marks, and
press the shutter release button halfway.
2 While keeping your finger on the half-depressed shutter
release button, move the camera to recompose the picture,
and fully press the shutter release button.
Focus lock can be canceled by lifting your finger from the shutter
release button.
Special focusing situations
Autofocus may be difficult to achieve with the following:
a Subjects too small to fully cover the autofocus frame marks
b Subjects behind glass
c Dark subjects with no reflection
d Glossy, light-reflecting surfaces, such as shiny cars or water
In the above circumstances, use focus lock.
To Next Page
Loading...
Need help?
General
