Removing film
g
The film automatically rewinds after the last picture has been
taken.
When the film has rewound completely, the motor stops,
the power is turned OFF, and the LCD panel indication shuts
itself off. Open the camera back and remove the
film.
To rewind the film before you reach the end of the film
roll,
press
the mid-roll rewind button gently with the tip of a pointed object.
When the mid-roll rewind operation is completed, turn the power
ON and make sure that the
'E"
sign appears in the LCD panel.
•
Do not open the camera back while rewinding the
film.
•
Do not attempt to pull the film out yourself.
To Next Page
Loading...
Need help?
General
