SOLUTION SYSTEM
SOLUTION TANK CLEANING [MICROMATIC M17B - MICROMATIC M17E]
Drive the machine to the appointed disposal area.
Check that the switches (5 and 6) are turned to “0”.
If necessary, empty the tank (44) by means of the valve (24).
Remove the sponge lter (45) and clean the tank (44) with clean water, then drain the water from the tank by means of the
valve (24).
SOLUTION FILTER CLEANING [MICROMATIC M17B - MICROMATIC M17E]
Check that the switches (5 and 6) are turned to “0”.
Empty the solution tank (44) by means of the valve (24).
Remove the transparent cover (A) and the lter strainer (B), then clean and reinstall them on the support (C).
NOTE
The lter strainer (B) must be correctly positioned on the housing (C) of the support (C).